Few dive watches get re-strapped as often as the Breitling Superocean. Many references leave the factory on rubber in the first place, so swapping the strap doesn't change the character of the watch — it simply lets you decide what that character is. Black for the classic tool look, blue or green to pick up the dial, or a fresh strap to replace one that has seen a few too many summers.
This guide covers the full Superocean family — the 42 mm, 44 mm, Heritage 44 mm, 46 mm and 48 mm — and answers the two questions owners actually search for: which size fits my watch, and which color works best with my dial and bezel.
Which Strap Size Fits Your Breitling Superocean?
Here's the easy part: you don't need to measure anything to order from us. Every strap in our Breitling Superocean collection is made per case size, so on the product page you simply select your model — Superocean 42 mm, Superocean 44 mm, Superocean Heritage 44 mm, Superocean 46 mm or Superocean 48 mm — and choose your buckle color. That's it.
For reference, these are the lug widths behind each case size:
| Your Superocean | Lug width |
|---|---|
| Superocean 42 mm (2022 and later) | 22 mm |
| Superocean 42 mm (pre-2022) | 20 mm |
| Superocean 44 mm | 22 mm |
| Superocean Heritage 44 mm | 22 mm |
| Superocean 46 mm | 24 mm |
| Superocean 48 mm | 24 mm |
One thing deserves special attention: the 42 mm is two different watches. When the Superocean was redesigned in 2022, the lug width of the 42 mm case changed from 20 mm to 22 mm. It is the single most common ordering mistake in the entire collection. If your 42 mm Superocean is from 2022 or later, it takes 22 mm; if it's the previous generation, it takes 20 mm. Not sure which one you own? Check your reference number, measure the gap between the lugs, or send us a message with your reference and we'll confirm the right option before you order.
A Diver First, Always
Breitling introduced the Superocean in 1957, and unlike many divers of that era it wasn't a styling exercise — it was built for military and professional divers who needed a serious instrument underwater. That purpose never left the collection. Modern references are rated to depths of 1,000 meters and beyond, and the current generation borrows its clean, high-contrast look from the 1960s Superocean "Slow Motion."
That heritage is exactly why rubber suits this watch so well. A steel bracelet is heavy on a case this capable, and leather has no business near salt water. A quality rubber strap keeps the Superocean doing what it was designed to do — and it's the configuration Breitling itself chose for many references straight from the factory.
The Best Straps for the Breitling Superocean
A simple rule works best here: let the strap follow the watch. The Superocean's dial and ceramic bezel already decide the color story, so the strap's job is to repeat it, not fight it. These four are the combinations our customers order most.
1. Black Rubber – The Classic Choice
Most Superoceans wear a black dial, a black ceramic bezel, or both, and on those watches nothing looks more correct than a black rubber strap for the Breitling Superocean. It's the closest thing to the factory configuration, it hides the scuffs of daily wear, and it works just as well under a jacket as it does in the water. If you're buying one strap for this watch, this is the one — and it's consistently one of the most popular choices among Superocean owners.
2. Navy Blue Rubber – For Blue Dials and Bezels
Blue has been part of the Superocean's identity for years, and on a blue-dial or blue-bezel reference a navy blue rubber strap makes the whole watch read as one design rather than a watch with a strap attached. It's tonal, understated, and very hard to get wrong.
3. Green Rubber – For the Green References
Breitling has leaned into green dials and bezels across recent Superocean releases, and matching them with a green rubber strap is the safe way to wear the color: the strap picks up a shade that's already on the watch instead of introducing a new one.
4. Grey Rubber – The Understated Option
If your dial is white or silver, or you simply want something quieter than black, a grey rubber strap is the answer. It softens the look of the larger 46 mm and 48 mm cases and pairs cleanly with brushed steel and titanium alike.
Beyond these four, the collection also includes white, orange, olive green, brown and red — worth a look if your reference carries one of those accent colors on the dial or minute hand.
Don't Forget the Buckle
Every strap ships with a buckle included, and you can choose the finish on the product page: silver, gold, rose gold or black. The logic is simple — silver for stainless steel cases, black for blacked-out and DLC-coated models, gold or rose gold if your Superocean has two-tone or gold elements. Matching the buckle to the case is a small detail that makes the strap look like it belongs.
Fitting Takes Seconds
All our Superocean straps come with integrated quick-release spring bars, so no tools are needed — the swap takes under a minute the first time and seconds after that. At 120 mm + 80 mm, the strap fits the vast majority of wrists comfortably.
The Right Strap, Backed for Life
Helvetus is one of the leading names in aftermarket straps for luxury watches, and the Superocean range is a good example of why: every strap is made for the specific case sizes of the model, not adapted from a generic design. All rubber straps come with a lifetime warranty, shipping is free worldwide, and there are no import costs on any order — which is part of the reason more than 50,000 customers have trusted us with their watches.
Browse the full Breitling Superocean strap collection to find your combination — and if you own a Chronomat, Navitimer or Avenger as well, you'll find dedicated options in our Breitling watch straps range.
